How To Set Date On Timex Expedition

Download Commodity

Download Article

The Timex Trek is a type of digital, outdoor sentry that features a stopwatch, alert clock, and timer. At that place are twenty-four different types of Timex Expedition watches, but they are all set in a very similar way. Setting your Timex Trek is done by pressing a series of button combinations on the watch itself.

1. 1

   Enter fourth dimension mode. Printing the Mode button until you enter Time way. The Mode push button is located on the lower left side of the lookout man face up. If you're in the stopwatch or alert style yous won't exist able to set the time. Keep pressing way until the four numbers indicating the time of solar day testify up. ^[1]

   • The time you lot see in Time Style may not exist correct – yous are trying to gear up your sentry after all. However, yous tin ensure that it is time style by checking to see if in that location are seconds ticking past on the right hand side of the picket.

2. two

   Press Fix. Printing and agree the Prepare button until "Time Zone" flashes on-screen. The Set push is located at the top left side of the watch face.

   • At this point yous'll also exist able to choose if you're in daylight savings fourth dimension or non. Choose appropriately.

   Ad

3. three

   Select your time zone. Press either the Plus or Minus buttons to select your electric current time zone. The Plus and Minus buttons are located at the top and bottom of the right side of the sentry face^[2] , respectively.

4. 4

   Set the correct hr. Printing the Style button and the "hour" digits volition brainstorm flashing on-screen. Now printing either the Plus or Minus button to select the correct 60 minutes of the day.

5. 5

   Set the correct minutes and seconds. Once you've ready the hour correctly printing the Mode push button. You'll notice that the "minute" digits volition begin flashing on-screen now. Press the Plus or Minus button to select the right time in minutes. ^[3]

   • If yous want to be actually exact you can press the Mode button again to set the seconds exactly. Once you lot printing style the "seconds" digits will brainstorm flashing just like everything else has. Press the Plus or Minus button to set up the seconds to zero or to match them upwardly with another clock.

6. 6

   Fix the month and appointment. Printing the Mode push in one case you're done setting the seconds if you want to set the calendar month and engagement. The day of calendar week will brainstorm flashing. Set up that, press Fashion again, and the month will get-go flashing. ^[4] Printing Fashion one more than fourth dimension and the year volition start flashing.

   • Exist careful non to printing Mode likewise many times or might skip a step. If that happens yous'll have to pass through all the previous instructions once again.

7. 7

   Press the Set up button to finish setting your sentinel. Once you lot have pressed the Set push button you'll exist returned to

   • You tin can printing the Gear up button at whatever time if you don't want to ready the seconds, month, or appointment. ^[5]

Advertisement

1. 1

   Locate the crown on your analog expedition watch. To set the time and date of your analog trek lookout you will first need to locate the crown. The crown will announced as a small circular disc on the edge of your watch. You will be pulling this disc out and abroad from the torso of the picket to ready both the fourth dimension and engagement.

   • Pulling the crown all the way out will allow you lot to adjust the fourth dimension.
   • Pulling the crown half way out to the heart position will permit you to adjust the date.
   • Pushing the crown back in volition restart the watch, starting from the fourth dimension and date you have set it to.

2. ii

   Prepare your sentinel to the right fourth dimension. Once yous've located the crown yous can apply it to adapt the time. Using the crown to adjust the time is a uncomplicated process that involves pulling information technology out fully and twisting it until the hands of the watch are at the right time. Follow these steps to set your watch using the crown:

   • Pull the crown out to its outer position, pulling equally far every bit it volition extend.
   • Once extended you can twist the crown to adjust where the arms of the picket are positioned.
   • Twist the crown until the arms are prepare to the right fourth dimension.
   • Button the crown back down into the scout to starting time information technology upward once more.

3. three

   Set the date and day on your scout. To set the date and solar day on your spotter yous will need to start find the crown. The crown will need to exist pulled out and abroad from the watch and and then twisted until the correct date is shown. Follow these few steps to use the crown when setting the date:

   • Find the crown and pull information technology out of the spotter to the middle position. This will exist half of its length.
   • Turn the crown clockwise until yous see the correct date.
   • If the date isn't changing, pull the crown to the outer position and turn alee by 24 hours.
   • Put the crown back into its neutral position, fully pressed downward into the watch.

Advertisement

Add together New Question

• Question

  How do I fix the stopwatch?

  

  For the archetype paw stopwatch you have to press the button at the top. For digital watches click the way button. For most smartphone devices go to the clock application, find the stopwatch, and click first.

• Question

  How can I set my Timex Expedition lookout man to display time 2 instead of fourth dimension ane?

  

  Press Starting time/Split up button to bike through time zones. Hold Start/Divide push button for 5 seconds to switch to the time zone desired.

Enquire a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Advertizement

Thanks for submitting a tip for review!

Nigh This Article

Commodity Summary X

To set a Timex Trek, first printing the Mode button on the lower left side of the watch face until yous enter Time manner. Press and hold the Set button, which is at the top left of the lookout man face, until "Time Zone" flashes on-screen. Select your current fourth dimension zone past pressing the Plus or Minus buttons, which are at the top and bottom of the right side of the watch. Hit the Mode push button and the "hour" digits volition begin flashing on-screen. Now press the Plus or Minus button to select the correct hour. In one case you've set the hour correctly, press the Mode button, which will make the "minute" digits wink. Utilize the Plus or Minus button to select the right time. To larn how to gear up the month and date on your Timex Expedition, proceed reading!

Did this summary aid you lot?

Thanks to all authors for creating a folio that has been read 176,631 times.

Did this article help yous?

Source: https://www.wikihow.com/Set-a-Timex-Expedition

Share this post